pH Meter Analyzer Sensor

pH Meter Analyzer

pH Analyzer merupakan bagian dari alat online water quality analyzer yang terhubung langsung melalui antarmuka komunikasi RS485, serta menyediakan data proses yang sederhana, biaya dengan pemantauan jarak jauh, kemampuan diagnostik, andal, konfigurasi dan hemat kalibrasi.

Alat penginderaan terdiri dari elektroda referensi, penguat sinyal, elektroda pH dan penguat sinyal. Penguat meningkatkan sinyal sehingga dapat diukur. Sedangkan Elektroda penginderaan pH bertindak sebagai transduser yang menghasilkan dan mengirimkan berbagai tingkat tegangan berdasarkan konsentrasi ion hidrogen bebas dalam air.


  • Locally available memory enabling clients to effectively adjust, arrange sensor at lab, and convey to different fields destinations

  • Limit cabling and engineering cost and 1.2 km rs 485 digital communication

  • Float free and high reliability

  • Arrangement without cabinet and robust ip68 water submersible enclosure

  • Dispense with i/o module cost, direct connected with plc, hmi, and standard modbus rtu protocol

  • Online real time measurement

  • Rs 485 communication and surge protection for power

  • Perfect for outdoor applications and ultra low power consumption

  • Temperature compensation

  • Information monitoring and software configuration calibration

pH sensor
Measurement range 0 ~ `4 pH
Accuracy ± 0.01 pH
Resolution 0.01 pH
Repeatability ± 0.01 pH
ORP sensor
Measurement range -2,000 ~ 2,000 mV
Accuracy ± 5 mV
Resolution 0.1 mV
Repeatability 0.5 mV
Operation pressure Max. 2 Kgf/cm² ; Max. 10 Kgf/cm²
Operating temperature 0 ~ 85 °C; -5 ~ 110 °C (optional)
Process flow rate 0.1 l /min
Response time 1 second
Protection IP 68
Temperature sensor PT 100
Temperature measurement range 0 ~ 85 °C
Temperature accuracy ± 0.5 °C; ± 0.1 °C (Optional)
Sensor material Glass
Process connection M 26 x 1.5
Housing POM
Dimension 40 Χ 360 mm
Weight analyzer: approx. 150 g (POM); 500 g (SS316L); 400 g (Titanium) cable: 80 g/m